18 GHz 047 NbTi Superconducting Cryogenic RF Coaxial Cable G12E-NT
P/N: G12E-NT
- For superconducting cryogenic RF interconnects
- NbTi conductors support ultra-low-temperature routing
- 1.22 mm OD for stable cable paths
- Suited to quantum control and readout lines
- Rated to 18 GHz for cable selection
Engineering Note
The G12E-NT is a 1.22 mm OD NbTi superconducting cryogenic RF coaxial cable designed for ultra-low-temperature RF routing where superconducting behavior and thermal conduction must be evaluated together. Its construction uses a niobium titanium wire inner conductor, PTFE dielectric, and niobium titanium alloy outer conductor, supporting superconducting cryogenic RF interconnects, quantum processor control and readout lines, and dilution refrigerator RF routing with minimized thermal load. The 18 GHz operating frequency is intended for preliminary cable selection; final assembly performance may depend on connector interface, cable length, routing form, thermal anchoring, and operating temperature stages.
Technical Specifications
| Cable Model | G12E-NT |
|---|---|
| Product Type | NbTi Superconducting Cryogenic RF Coaxial Cable |
| Material Family | NbTi |
| Outer Diameter | 1.22 mm |
| Operating Frequency | 18 GHz |
| Cable-Level Cutoff Frequency | 108 GHz |
| Characteristic Impedance | 50 ± 2.5 Ω |
| Shielding Effectiveness | >165 dB |
| Dielectric Withstand Voltage | 100 V DC |
| Velocity of Propagation | 70% |
| Min. Bending Radius, Static | 6.40 mm |
| Weight | 0.0047 kg/m |
| Temperature Range | -269°C to 200°C |
| 4K Thermal Conductivity | 7.54 ×10⁻⁶ W·cm/K |
| Inner Conductor | Niobium titanium wire, 0.290 mm [0.011 in] |
| Dielectric | PTFE, 0.940 mm [0.037 in] |
| Outer Conductor | Niobium titanium alloy, 1.220 mm [0.048 in] |
| Attenuation @ 300K | 5.3 dB/m @500 MHz; 7.5 dB/m @1 GHz; 16.9 dB/m @5 GHz; 24.0 dB/m @10 GHz; 32.3 dB/m @18 GHz |
| Attenuation @ 4K | <0.4 dB/m @500 MHz; <0.4 dB/m @1 GHz; <0.4 dB/m @5 GHz; <0.4 dB/m @10 GHz; <0.4 dB/m @18 GHz |
Target Applications
Superconducting Cryogenic RF Interconnects
Suitable for superconducting low-temperature RF paths where NbTi conductor behavior and minimized thermal load are key design factors.
Quantum Processor Control and Readout
Used for quantum processor control and readout lines requiring ultra-low-temperature RF routing with very low 4K attenuation.
Dilution Refrigerator RF Routing
Supports dilution refrigerator wiring where superconducting NbTi behavior, cable routing, and preliminary heat-load estimation must be considered together.
Engineering Support
Need a Quote or Technical Support?
Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.
Product selection support
Custom configurations available
Specification and compatibility review




