18 GHz 034 NbTi Superconducting Cryogenic RF Coaxial Cable G08E-NT

P/N: G08E-NT

  • For superconducting cryogenic RF interconnects
  • NbTi conductors support ultra-low-temperature routing
  • 0.86 mm OD suits compact dilution wiring
  • Suited to quantum control and readout lines
  • Rated to 18 GHz for cable selection
Engineering Note
The G08E-NT is a 0.86 mm OD NbTi superconducting cryogenic RF coaxial cable designed for ultra-low-temperature RF routing where superconducting behavior and thermal conduction must be evaluated together. Its construction uses a niobium titanium wire inner conductor, PTFE dielectric, and niobium titanium alloy outer conductor, supporting superconducting cryogenic RF interconnects, quantum processor control and readout lines, and dilution refrigerator RF routing with minimized thermal load. The 18 GHz operating frequency is intended for preliminary cable selection; final assembly performance may depend on connector interface, cable length, routing form, thermal anchoring, and operating temperature stages.

Technical Specifications

Cable Model G08E-NT
Product Type NbTi Superconducting Cryogenic RF Coaxial Cable
Material Family NbTi
Outer Diameter 0.86 mm
Operating Frequency 18 GHz
Cable-Level Cutoff Frequency 154 GHz
Characteristic Impedance 50 ± 3 Ω
Shielding Effectiveness >165 dB
Dielectric Withstand Voltage 100 V DC
Velocity of Propagation 77%
Min. Bending Radius, Static 3.20 mm
Weight 0.0024 kg/m
Temperature Range -269°C to 200°C
4K Thermal Conductivity 4.63 ×10⁻⁶ W·cm/K
Inner Conductor Niobium titanium wire, 0.220 mm [0.009 in]
Dielectric PTFE, 0.650 mm [0.026 in]
Outer Conductor Niobium titanium alloy, 0.860 mm [0.034 in]
Attenuation @ 300K 6.7 dB/m @500 MHz; 9.6 dB/m @1 GHz; 23.0 dB/m @5 GHz; 34.0 dB/m @10 GHz; 48.0 dB/m @18 GHz
Attenuation @ 4K <0.5 dB/m @500 MHz; <0.5 dB/m @1 GHz; <0.5 dB/m @5 GHz; <0.5 dB/m @10 GHz; <0.5 dB/m @18 GHz

Target Applications

Superconducting Cryogenic RF Interconnects
Suitable for superconducting low-temperature RF paths where NbTi conductor behavior and minimized thermal load are key design factors.
Quantum Processor Control and Readout
Used for quantum processor control and readout lines requiring ultra-low-temperature RF routing with very low 4K attenuation.
Dilution Refrigerator RF Routing
Supports dilution refrigerator wiring where compact cable diameter, non-magnetic material behavior, and preliminary heat-load estimation must be considered together.
Engineering Support

Need a Quote or Technical Support?

Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.

Product selection support
Custom configurations available
Specification and compatibility review

Request a Quick Quote