2.92 mm Male-to-Male Integrated Armored RF Test Cable Assembly, DC–40 GHz | VST-L-292M292M-T26KB-XXXX
P/N: VST-L-292M292M-T26KB-XXXX
• DC–40 GHz performance with precision 2.92 mm male interfaces
• VSWR ≤1.25 across the full rated frequency range
• ±1 ps phase matching for paired assemblies
• T26KB integrated armored construction for repeated high-frequency test routing
• Configurable lengths with insertion loss documented in the corresponding test report
VST-L-292M292M-T26KB-XXXX is a 50 Ω 2.92 mm male-to-male integrated armored RF test cable assembly for precision microwave and millimeter-wave measurements from DC to 40 GHz. It combines 2.92 mm precision interfaces with the T26KB integrated armored construction for repeated laboratory and production-test routing.
The assembly is specified for VSWR ≤1.25 across DC–40 GHz, phase matching of ±1 ps for paired assemblies, an operating temperature range of -55°C to +125°C, shielding effectiveness of ≥90 dB at 1 GHz, and a minimum bend radius of 25 mm. Assembly length is configurable; insertion loss is documented in the corresponding test report.
DC–40 GHz Performance
2.92 mm male interfaces support broadband microwave and millimeter-wave test interconnects through 40 GHz.
VSWR ≤1.25 to 40 GHz
VSWR is specified at ≤1.25 across the full DC–40 GHz rated frequency range.
±1 ps Phase Matching for Pairs
Paired assemblies can be phase matched to ±1 ps for measurement setups that require closely matched electrical paths.
Integrated Armored Construction
T26KB construction provides a protected cable body and reinforced connector transitions for repeated high-frequency test routing and handling.
For measurements through 40 GHz, cable length, routing, connector condition, and mating practice should be considered together with the required insertion-loss and phase-matching requirements. The 2.92 mm male-to-male configuration is suited to precision coaxial interconnection between high-frequency instrumentation, fixtures, modules, and devices under test.
| Part Number | VST-L-292M292M-T26KB-XXXX |
|---|---|
| Interface | 2.92 mm Male to 2.92 mm Male |
| Impedance | 50 Ω |
| Frequency Range | DC–40 GHz |
| VSWR | ≤1.25 Max., DC–40 GHz |
| Insertion Loss | See corresponding test report |
| Phase Matching for Pair | ±1 ps |
| Dielectric Withstand Voltage | 1000 VRMS |
| Insulation Resistance | ≥5000 MΩ |
| Shielding Effectiveness | ≥90 dB @ 1 GHz |
| Mechanical Durability | ≥500 cycles |
| Cable Type | VXT260KB |
|---|---|
| Construction | T26KB integrated armored RF test cable assembly |
| Assembly Length | Custom (XXXX mm), subject to drawing tolerance |
| Cable Diameter | Ø4.95 ± 0.15 mm |
| Connector Transition | Black heat-shrink tubing |
| Minimum Bend Radius | 25 mm |
| Operating Temperature | -55°C to +125°C |
40 GHz VNA Measurements
High-frequency interconnection between vector network analyzers, test fixtures, modules, and devices under test.
Phase-Matched Multi-Path Measurements
Paired cable paths for measurement setups where closely matched electrical delay between channels is required.
Microwave & mmWave Component Test
Coaxial test paths for connectors, adapters, passive components, modules, and broadband devices through 40 GHz.
RF & Microwave R&D
Precision laboratory interconnects requiring 2.92 mm connectivity, armored construction, and repeatable broadband routing.
Insertion loss for the configured assembly length is documented in the corresponding test report. Where phase-matched pairs are required, specify the paired configuration at order stage. Use appropriate 2.92 mm precision-connector mating and torque practices, maintain a bend radius of at least 25 mm, and avoid unnecessary mechanical loading at the connector transitions.
Need a 40 GHz armored cable assembly or phase-matched pair?
Share your required length, interface configuration, phase-matching requirement, routing constraints, and application. Our engineering team can review the assembly configuration before quotation.
Related products
-
DC to 40 GHz 2.92mm Male to 2.92mm Male 0.086″ Semi-Rigid Cable Assembly
-
DC to 67 GHz 1.85 mm Male to 1.85 mm Male Microwave Test Cable Assembly Using T24KB Low-Loss Ruggedized Flexible Cable
-
TNC female bulkhead to Right angle MHF IPEX IPX UFL rg178 RF Coaxial Cable
-
DC~26.5GHZ SMA male to SMPM Female .141″ super flexible cable assembly
Need a Quote or Technical Support?
Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.