DC – 18 GHz SMA Male to SMPM Female Phase – Stable Super – Flexible Cable Assembly
Vinstronics Part Number: VST-L-SMSMPMF-W15
Key features
- Phase Stable Over Temperature
- Phase & Amplitude Stable V. Flexure
- Low Loss
- Light weight
- Low VSRW
- Ultra Flexible
- Low PIM
Description
The DC – 18 GHz SMA Male to SMPM Female Phase – Stable Super – Flexible Cable Assembly by Vinstronics features a 50 – Ohm SMA male connector at one end and a 50 – Ohm SMPM female connector at the other end. Vinstronics’ W series cable assemblies are specifically engineered to be low – loss, highly flexible, and capable of handling high – power, high – frequency applications.
These assemblies exhibit minimal phase change over temperature and flexure, ensuring consistent performance even under dynamic conditions. With a cable jacket size of 1.5 mm, a static bending radius of 8 mm, and a dynamic bending radius of 15 mm, they offer exceptional mechanical flexibility. The cable has a low attenuation of 4.99 dB/meter at 18 GHz, maintaining signal integrity across its wide frequency range of DC to 18 GHz. The VSWR is tightly controlled at less than 1.25 at 18 GHz, and the time delay is matched within ±1 ps. These cable assemblies are ideal for any scenario requiring phase stability, such as precision test and measurement, aerospace, and defense applications.
Typical Applications
- Phased array radar
- Anti-missile defense
- Electronic warfare
- 5G testing
- RF Anechoic Chamber
- Satellite communication
- Aerospace and Defense
- Lab testing
Key Specifications
| Connector Series 1 | SMA Male Straight(stainless steel) |
| Connector Series 2 | SMPM female(brass gold plating) |
| Cable | W15 |
| Cable jacket size | 1.5mm |
| Cable Attenuation | 4.99db/meter @18ghz |
| Impedance | 50ohm |
| Static Bending Radius | 8mm |
| Dynamic Bending Radius | 15mm |
| Frquency | DC~18GHz |
| Impedance | 50Ohm |
| VSWR | <1.25@18GHz |
| Time delay matched | <±1ps |
| Temperature Phase Stability | <1000PPM@-55°C~85°C |
| Mechanical Phase Stability | ±0.03dB@18GHz |
| Shield Efficiency | >90db |
| Propagation Velocity | 75% |
| Length | 6″ 12″ 18″ 36″ 48″ 72″ or customized length |
Related products
-

DC – 50 GHz 2.4mm Male to 2.4mm Male Phase-stable Low Loss Cable Assembly
-

DC to 67 GHz 1.85 mm Male to 1.85 mm Male Microwave Test Cable Assembly Using T24KB Low-Loss Ruggedized Flexible Cable
-

Precision DC67ghz NMD 1.85mm female to 1.85mm male VNA test cable assembly for vector network analyzer
-

DC~26.5GHz High performance Phase Stable SMA male to SMA male RF test Cable Assembly
Need a Quote or Technical Support?
Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.


