DC–6 GHz SSMP Female Right-Angle to SSMP Female Right-Angle I16 RF Cable Assembly VST-L-2SSMPRF-I16-350
P/N: VST-L-2SSMPRF-I16-350
– Dual right-angle SSMP female interfaces
– DC–6 GHz path for compact modules
– 350 mm I16 cable assembly
– Shielded routing for fixture interconnects
– Built for repeated connector mating cycles
Engineering Note
The VST-L-2SSMPRF-I16-350 is a DC–6 GHz SSMP female right-angle to SSMP female right-angle I16 RF cable assembly for compact RF modules, fixture wiring, and short internal interconnect paths where connector exit direction matters. Its dual right-angle SSMP geometry and 350 mm ±5 mm cable length support tight routing inside RF assemblies, while the confirmed 50 Ω impedance, ≤1.25 VSWR, 300 VRMS dielectric withstand voltage, and ≥90 dB shielding efficiency at 1 GHz provide a defined baseline for engineering review.
Technical Specifications
| Model | VST-L-2SSMPRF-I16-350 |
|---|---|
| Product Type | Right-angle SSMP I16 RF cable assembly |
| Interface | SSMP female right angle to SSMP female right angle |
| Cable | I16 |
| Length | 350 mm ±5 mm |
| Frequency Range | DC–6 GHz |
| Impedance | 50 Ω |
| VSWR | ≤1.25 max., DC–6 GHz |
| Dielectric Withstand Voltage | 300 VRMS |
| Operating Temperature | -55°C to +125°C |
| Insulation Resistance | ≥5000 MΩ |
| Bending Radius | ≤6 mm |
| Shielding Efficiency | ≥90 dB at 1 GHz |
| Mechanical Durability | ≥500 cycles |
Target Applications
Compact RF Modules
Short DC–6 GHz SSMP interconnects where right-angle connector exit helps route cable paths inside limited module space.
RF Test Fixtures
Fixture wiring and bench-level RF paths that need a defined 50 Ω cable assembly with compact SSMP connector orientation.
Chassis Interconnects
Internal equipment routing where 350 mm cable length and dual right-angle ends reduce connector clearance demands.
RF Front-End Assemblies
Shielded RF routing for front-end boards and subassemblies operating within the confirmed DC–6 GHz range.
Related products
-

DC to 67 GHz 1.85 mm Male to 1.85 mm Male Microwave Test Cable Assembly Using T24KB Low-Loss Ruggedized Flexible Cable
-

Precision DC67ghz NMD 1.85mm female to 1.85mm male VNA test cable assembly for vector network analyzer
-

DC~18Ghz SMA male to N male cable 0.141 rg141 rg402 semi-flexible cable
-

TNC female bulkhead to Right angle MHF IPEX IPX UFL rg178 RF Coaxial Cable
Engineering Support
Need a Quote or Technical Support?
Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.
Product selection support
Custom configurations available
Specification and compatibility review

