2.4 mm Male-to-Male Integrated Armored RF Test Cable Assembly, DC–50 GHz | VST-L-24M24M-T26KB-XXXX
P/N: VST-L-24M24M-T26KB-XXXX
• DC–50 GHz performance with precision 2.4 mm male interfaces
• VSWR ≤1.25 across the full rated frequency range
• T26KB integrated armored construction for repeated high-frequency test routing
• Configurable lengths with insertion loss documented in the corresponding test report
• Minimum bend radius 25 mm; operating temperature -55°C to +125°C
VST-L-24M24M-T26KB-XXXX is a 50 Ω 2.4 mm male-to-male integrated armored RF test cable assembly for precision microwave and millimeter-wave measurements from DC to 50 GHz. It combines 2.4 mm precision interfaces with the T26KB integrated armored construction for repeated laboratory and production-test routing.
The assembly is specified for VSWR ≤1.25 across DC–50 GHz and ±1 ps phase matching for paired assemblies, with an operating temperature range of -55°C to +125°C, ≥90 dB shielding effectiveness at 1 GHz, and a minimum bend radius of 25 mm. Assembly length is configurable; insertion loss is documented in the corresponding test report.
DC–50 GHz Performance
2.4 mm male interfaces support broadband microwave and millimeter-wave test interconnects through 50 GHz.
VSWR ≤1.25 to 50 GHz
VSWR is specified at ≤1.25 across the full DC–50 GHz rated frequency range.
Integrated Armored Construction
T26KB construction provides a protected cable body and reinforced connector transitions for repeated high-frequency test routing and handling.
±1 ps Phase Matching for Pairs
Paired assemblies can be phase matched to ±1 ps for measurement setups that require closely matched electrical paths.
For measurements through 50 GHz, cable length, routing, connector condition, and mating practice should be considered together with the required insertion-loss and phase-matching requirements. The 2.4 mm male-to-male configuration is suited to precision coaxial interconnection between high-frequency instrumentation, fixtures, modules, and devices under test.
| Part Number | VST-L-24M24M-T26KB-XXXX |
|---|---|
| Interface | 2.4 mm Male to 2.4 mm Male |
| Impedance | 50 Ω |
| Frequency Range | DC–50 GHz |
| VSWR | ≤1.25 Max., DC–50 GHz |
| Insertion Loss | See corresponding test report |
| Phase Matching for Pair | ±1 ps |
| Dielectric Withstand Voltage | 1000 VRMS |
| Insulation Resistance | ≥5000 MΩ |
| Shielding Effectiveness | ≥90 dB @ 1 GHz |
| Mechanical Durability | ≥500 cycles |
| Cable Type | VXT26KB |
|---|---|
| Construction | T26KB integrated armored RF test cable assembly |
| Assembly Length | Custom (XXXX mm), subject to drawing tolerance |
| Cable Diameter | Ø4.95 ± 0.15 mm |
| Connector Transition | Black heat-shrink tubing |
| Minimum Bend Radius | 25 mm |
| Operating Temperature | -55°C to +125°C |
50 GHz VNA Measurements
High-frequency interconnection between vector network analyzers, test fixtures, modules, and devices under test.
Millimeter-Wave Component Characterization
Coaxial test paths for connectors, adapters, passive components, modules, and other devices operating through 50 GHz.
Phase-Matched Multi-Path Measurements
Paired cable paths for measurement setups where closely matched electrical delay between channels is required.
RF & Microwave R&D
Precision test interconnects requiring 2.4 mm connectivity, armored construction, and broadband operation through 50 GHz.
Insertion loss for the configured assembly length is documented in the corresponding test report. Where phase-matched pairs are required, specify the paired configuration at order stage. Use appropriate 2.4 mm precision-connector mating and torque practices. Maintain a bend radius of at least 25 mm and avoid unnecessary mechanical loading at the connector transitions.
Need a 50 GHz armored cable assembly or phase-matched pair?
Share your required length, interface configuration, phase-matching requirement, routing constraints, and application. Our engineering team can review the assembly configuration before quotation.
Related products
-
DC to 110 GHz 1.0 mm Male to 1.0 mm Male Test Cable Using T36KB Low-Loss Ruggedized Flexible Cable
-
DC to 67 GHz 1.85 mm Male to 1.85 mm Male Microwave Test Cable Assembly Using T24KB Low-Loss Ruggedized Flexible Cable
-
DC~110ghz 1.0mm male to 1.0mm female cable assembly
-
DC~18Ghz SMA male to N male cable 0.141 rg141 rg402 semi-flexible cable
Need a Quote or Technical Support?
Share the part number, required quantity and application requirements. Our engineering team can assist with product selection, configuration review and quotation support.